Responsive Menue
no snippet data
available
Preciosa

STRASS.com - Preciosa

mailing expenses

gogoritas.com mailing expenses Free shipping for orders over 500€ (world-wide)

support hotline

gogoritas.com support hotline +49 (0)5361 89075-4 Mo-Fr: 09:00h - 13:00h
eMail: info@gogoritas.com

fast delivery

gogoritas.com fast delivery 24h Germany
72h Europe-wide experience values, if ordered and payed weekdays until 13:00h

second currency

we accept

Paypal
DIRECTebanking.com
UPS

« back
Hand rivet plier "Crystal Applicator" for SWAROVSKI ELEMENTS Strass-Pins
  1. Adapter (Product No. RPAD1)
  2. Upper dies for SS16 (No. RPU16), SS20 (No. RPU20) or SS34 (No. RPU34) Strasspins
  3. Arresting screw for fixing the upper die
  4. Adhesive pad for the maintenance of the Strasspin on the upper die
  5. Pin / metal rod for inserting and removing the adhesive pads
  6. Strasspin
  7. Lower dies for the SS16 and SS20 (No. RPL1620) or SS34 (No. RPL34) Strasspins
  8. Plier (No. JTCA)
  9. Turn screw (To adjust the offset or the pressure)
  10. Arresting screw for fixing the lower die
Screw the adapter (A) into the upper thread
Loosen the paper strip from the adhesive pad (D) and replace it with the adhesive side down into the upper die (B). Take the pin / metal rod (E) for help
Insert the upper die (B) to the desired size (SS16/20/34) to the adapter (A) and tighten the tool with the supplied locking screw (C)
The right lower die (G) is placed and tightened with the appropriate locking screw (J)
With minimal pressure, you can press the Strasspin with the claws down into the upper die by hand. By the adhesive pad Strasspin remains in the position
If necessary, change the offset or the pressure using the adjustment screw (I)
Now place the product to be decorated on the lower die. Press the pinch of the plier together to apply the Strasspin to the material. The detail picture shows the back side of the Strasspin



We recommend the following products:

Strasspins of Swarovski Elements | Stainless steel | SS10 (2.8mm) - SS34 (7.2mm), Color Multi Size Mix

Strasspins of Swarovski Elements | Stainless steel | SS10 (2.8mm) - SS34 (7.2mm), Color Multi Size Mix [Details] Strasspins of Swarovski Elements | Stainless steel | SS10 (2.8mm) - SS34 (7.2mm), Color Multi Size MixColor: Color Multi Size Mix
Size: SS10, SS16. SS20, SS34
Manufacturer: Swarovski

Mounting: Stainless steel

You can use the Strasspins easily on any kind of Fabrics or Leather. It is very important to carefully check the thickness (not thicker then 2mm), flexibility and structure of the fabrics before starting the applications process.
Pierce the Strasspins through the material and bend over the ends at the back side. You can use a hard, flat object. For example a knife etc.

(ItemNo. SW53301-04MIXMSM)

only 120,64 EUR* (128.24 USD)
Immediate shipping available

Please select: